SCARICARE
TUTTI I DOWNLOAD IN SINTESI
cartella immagini
analisi dei gas stazionari
analisi mobile dei gas
desolforazione
misurazione di portata gas
attrezzature di laboratorio
assistenza
Software
CARTELLA IMMAGINI
ANALISI DEI GAS STAZIONARI
- Dati tecnici AwiECO
- Dati tecnici AwiFLEX
- Istruzioni per l'uso AwiECO Parte A
- Istruzioni per l'uso AwiECO Parte B
- Istruzioni per l'uso AwiFLEX Parte A
- Istruzioni per l'uso AwiFLEX Parte B
- Istruzioni per l'uso AwiFLEX XL Parte A
- Istruzioni per l'uso AwiFLEX XL Parte B
- Istruzioni per l'uso Collegamento bus
- Istruzioni operative per la valutazione dei dati AwiView 2.0 Data Evaluation Operating Instructions
- Guida rapida alla valutazione dei dati AwiView 2.0
ANALISI MOBILE DEI GAS
INSTALLATION NOTE
The latest firmware for the Awi2GO can be downloaded to the Awite USB stick and will be installed automatically after inserting it into the Awi2GO and switching the device on. The software update is cumulative and should be installed on all devices.
Changelog V.1.0.41
- Calibration: Calculation and limits of permissible deviation modified once again
Changelog Archiv
Changelog V.1.0.40
- Pressure is also monitored outside the measurement process in order to detect very high pressures as soon as the device is connected
- Calibration: Calculation and limits of the permitted deviation have been modified
- Entering the current date: The format ‘YYYY-MM-DD’ is displayed
Changelog V.1.0.34
- Information about installed firmware version is stored in backup data
- Update functionality expanded (additional device number-specific update files possible)
Changelog V.1.0.28
- Backup message: Corrected a spelling error in the backup message.
- Data transfer: Fixed an issue where an incorrect device number was displayed during a transfer attempt with a non-matching device number.
Changelog V.1.0.27
- Backups from devices with more than 2000 measured values could not be restored. For devices with large amounts of data, an error message also appeared if the USB stick was inserted before switching on, because communication with the sensors is interrupted during data transfer.
- V1.0.27 for devices with SN: 08316-00037 to 00041; 08317-00076 to 00085; 08318 - not affected
Changelog V.1.0.18
- Calibration date was displayed for each individual sensor instead of just once at the top level (when a total calibration was performed). Time display layout optimised (hours too far to the left with narrow numbers ‘11’, now HH MM SS right-aligned/centred/left-aligned. Text field for sensor serial number and backup information extended (text content was truncated depending on the number combination because the text field was too short).
- V1.0.18 for devices with SN: 08316-00032 to 00036; 08317-00063 to 00075; 08318 - not affected
Changelog V.1.0.15
- Pump monitoring: required pressure difference changed from 1 mbar to 0.2 mbar (otherwise error message in case of negative pressure)
- V1.0.15 for devices with SN: 08316- not affected; 08317-00038 to 00062; 08318 - not affected
Changelog V.1.0.9
- Restore configuration: Measuring points were not read in
- V.1.0.9 for devices with SN: 08316-00025 to 00031; 08317- not affected; 08318-0001 to 00018
DESOLFORAZIONE
MISURAZIONE DI PORTATA GAS
ATTREZZATURE DI LABORATORIO
ASSISTENZA
AUTOMAZIONE
SOFTWARE
- Analisi dei gas Programma di test AwiteSocket
- AwiView 2.0.1269.5 per Windows
- AwiView 2.0.1269.5 per Windows - DEUTSCH
- Manuale d'uso AwiView 2.0
- Guida rapida AwiView 2.0
- ProcessviewBrowser 4.7.5 per Windows
- ProcessviewBrowser 2.9 per Windows
- ProcessviewBrowser 2.9 per Linux
- AWITE TeamViewer per Windows